The Reef Tank banner
1 - 3 of 3 Posts

·
Registered
Joined
·
79 Posts
Discussion Starter · #1 ·
Ok I will be starting to build my system this weekend, I was wondering if their are any plumbing or electrical tips to follow. The tank is a custom 65g 36x18x24 which will house a open system flowing through a sump/refuge and also a closed loop system running thru a SCWD, I have 2 strong pumps (MAG12) which will be too much so i plan to use ball valves to control somewhat. I will be lighting with 2 - 36w VHO Actinics, 2 - 250 Ice Cap MH Lamps which will all be powered thru Ice Cap timers, and also adding 2 Orion fans for cooling in the canopy. I want to make a quiet system, that will not leak of course. So any tips would be helpful.

Thanks
 

·
Registered
Joined
·
79 Posts
Discussion Starter · #6 ·
I will have all returns on Locline to adjust , the returns from the open system is about 2 inches down from the top and the close loop returns which will be on the SCWD are about 12 inches down
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top