The Reef Tank banner
1 - 2 of 2 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
I have an arctica 1/4 hp chilling a 135 gallon tank with a 60 gallon sump. I have calibrated the chiller a few times to match the sumps temperature but as the day goes on, the temperature on the chiller lcd is not matching the temperature in the tank causing it to go on or off at the readings that the chiller is doing. Is there any reason or someone with experience about this?

IMO the chiller lcd should match exactly with the sumps temp readings but it seems to be off even after several calibrations. Someone please help.

Thank you
 

·
Registered
Joined
·
414 Posts
My aqua euro chiller stays 3degrees above the tank temperature and kicks on at that time. it is set for 78 but the tank usually reads at 77.6 or so. I didn't think it was to big of a deal, and have heard others with my chiller report the same experience.
 
1 - 2 of 2 Posts
Top