The Reef Tank banner
velocity
1-2 of 2 Results
  1. The THINK Tank
    I am designing a CLS for a 360 Gal acrylic tank (8'Lx24Wx36H) I have purchased a Barracuda pump with 1.5" inlet and outlet. After bends, valves and bulkheads, the return will end up in spray bars along the back. Based on pipe cross-sectional area, 1.5" = (2x1")=(4x3/4")=(8x1/2") =(16x3/8") =...
  2. Water movement (pumps & wavemakers)
    Hello, I have an Iwaki pump that is really noisy and decided I will be replacing it. My setup. I have an auqapod 24 gallons (yeah its like a bicycle with training wheels bu I am still learning about reefs) with a 3 inch sand bed. I opened up one side of the tank so the intake is from the...
1-2 of 2 Results
Top