Greetings- Is anyone using Tunze Stream Powerheads with Aqua Surf? I'm setting up a new 125 mixed community tank. Not going full-blown reef (going to do the best I can with florescent). Admittedly, I'm considering using tank management by Aqua Notes/ Aqua Controller because they are the...

Mag12 - $60 Precision Marine Kalk Reactor - $160 Icecap 660 with wiring harness - $80 Ocean Motions Squirt - $100 Tunze Stream 6100 w/ controller - SOLD 2 95W (35 in ) VHO Actinics - $15 each (NEW) Amiracle sump ~12x20 - $25 Ecosystem HOB filter no light - $30 ALL PRICES DO NOT...

All equipment was used for approximately 6 months. Everything is in excellent condition. I live in Lakeville, MN: Will not ship.<O:p</O:p Just added -1- Grotech TEC III NG Digital 3 Channel dosing pump $300.00 SOLD 1 - Deltec AP851 Protein Skimmer - $500.00 SOLD 2 - Deltec FR509 Fluidized...

I don't like the MJ Mod... Going Old School...w.pics I orderd a few MJ 1200 and (manufacture with held)mods last week and HATE them. There bulky, loud and are absoulty horrible on a wave maker.... I had one fall, cloud the tank, and almost destroy my most prized coral a 14" monti cap...

Because I was asked for I would like to show the members of TRT one ore two of my aquariums. All my friends of the other forum know me and my aquariums already very well. My journey with saltwater tanks started in the spring of 1986 with a 75gal. Fish tank.Topically I have 5 aquariums, three...

Tunze Stream 6080 w/ magnet- $160 http://www.marinedepot.com/ps_ViewIt...ct~TZ1315.html Iwaki MD-55 RLT (japanese motor) - $150 http://www.marinedepot.com/ps_ViewIt...ct~IK1153.html Iwaki MD-30 RLT (japanese motor) - $135 http://www.marinedepot.com/ps_ViewIt...ct~IK1133.html Iwaki MD-20 RLT...

Tunze Stream 6080 w/ magnet- $160 http://www.marinedepot.com/ps_ViewIt...ct~TZ1315.html Iwaki MD-55 RLT (japanese motor) - $150 http://www.marinedepot.com/ps_ViewIt...ct~IK1153.html Iwaki MD-30 RLT (japanese motor) - $135 http://www.marinedepot.com/ps_ViewIt...ct~IK1133.html Iwaki MD-20 RLT...

yep i know it seems i have been gone forever , but after three months of being invisible things are getting back to normal , well sort of .... the new tank is up and running but with lots of little things to do yet . so i should be back around alittle more and will continue to add to this...

I have a profiLux controller and was looking at the Hydor Koralia Controllable Pumps to use with it (the ProfiLux controller will control Tunze Pumps as it is now) Some thing like the "DC TO PULSE WIDTH MODULATOR" on this page http://www.electronics123.com/s.nl/it.A/id.2035/.f and a 12vdc...

i've got alot of money wrapped up in equipment for my 75. i want to go bare bottom for an sps setup. i can't find 1 thread on exactly how to make and install a starboard bb. do i set it on pvc? do i glue it so no water gets under it? also was wondering if the coralife 500w mh system is too much...

After completing my first reef tank two years ago, it is definitely time to upgrade. I am also looking at getting my first house, so I figured it would be perfect timing to setup a new tank. Hopefully I can have the majority of this tank constructed in the next three months and then add water...

I have seen some nice stands and canopies like CRVZ's. I would like to see some more to get some ideas on building one. Epecially those that are really finished off and those made with minimal tools and have a finished look. And my minimal tools I mean no table saws or routers just a circular...

I was thinking of taking my flow to the next lvls and upgrading my 6045's to 6055's with the multcontroller to do some wave action in the tank. You guys think that this would be worth it? or should I save all the cash and just stick with the non controllable ones.

OK latest brain storm. 30G Oceanic Cube / Stand - $300 Deltec MCE600 Skimmer - $500 Current USA 250W MH - $300 2-3 maxijets (OWN) Litremeter for ATO (OWN) 100W heater (OWN) Salifert test kits (OWN) B-Ionic (OWN) 1 bag of Natures Ocean sand 20-30 lbs of LR What do ya think? Missing anything

OK I have a problem with my vortech - it won't stay together. it'll run for few days then I'll walk in to find the propellor part laying in the sand bed. My side glass is 1/2" and I have the pins set properly and the cord is 2" above the motor as directed. and all glass is clean inside and out...

Koralia's! They are finishing the final tests on them and should be out within a month. They will be available in all sizes from the nano to the 4. Got the scoop about an hour ago and thought I would pass it on to all of you. I have no idea on the prices yet.

You know - I am still debating on the 28G Nanocube or a bigger tank. I know I wil lget bored of the Nanocube eventually since it can only house maybe 2-3 small fish and a few corals. I confirmed the electrical issue will cost allot to do and its probably out of the question. With a TV, DVD...

Hey all...I have a question and since I can't seem to get people to check out my build thread I'll post it here instead ;) Ok...going on a recommendation of a friend I bought a Wave2K. Cool idea, not so cool product IMO. I started it up last night...it seemed really cool. Not tool loud...

I am as new as they come to salt water and Im just getting started with my build what would be a good wave/ current maker for my 210gMega flow reef tank? I was told by the LFS Vortec with TDS meter. :read:

Anyone ever use one of these? http://www.marinedepot.com/ps_ViewItem~SearchStr~~action~view~idProduct~WY1131~idCategory~FIWMIW~category~WavySea_Plus_Wavemaker___Black_Saltwater_Aquarium_Supplies_Wavemakers_Internal~vendor~~tab~1.html It says it can handle up to 3600 gph. It can handle about...