The Reef Tank banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. General Reef Discussion
    Does anyone use Reef Fanatic PH Controller for Saltwater System? The PH for reef system is around 8.0-8.2. The PH calibration option over here is PH 4.0 and PH 7.0. How to calibrate PH 10.0 using this Controller? Please suggest. The instruction manual says to calibrate only PH 4.0 and PH 7.0...
  2. General Reef Discussion
    I have purchasing a reef fanatic ph controller. Its completely new never been used. but the person selling it does not have the calibration fluid. instruction says I need the fluid of pH 4 and 7. I am not able to find the fluid online of the same brand. where to find these i.e. reef fanatic...
  3. Palmetto Marine Aquarium Club
    Ok, when I was doing a water change tonight, my GFCI "interrupted". After trail and error, I figured out it was my Calcium Reactor's regulator. When it is plugged in it trips the GFCI. I did not spill water during the WC and there was no backflow of tank water into the regulator so the regulator...
  4. General Reef Discussion
    Hey all, I have a Reef Fanatic CO2 regulator which is a year old. This is the type which does not have an adjustment but is automatically set to deliver CO2 at a set rate to the needle valve (think no separate regualtor knob to adjust back pressure). Until recently, I had no difficulties. A...
1-4 of 4 Results
Top