The Reef Tank banner
plumbing design
1-4 of 4 Results
  1. DIY Forum
    I am going to be drilling into the bottom of my acrylic JBJ 10G Nanocube to make some plumbing modifications for adding a refugium or sump underneath (likely a sump). To minimize the risk of cracking the acrylic bottom during drilling the holes for the CPVC I have been thinking about using a...
  2. General Reef Discussion
    hi, thank you for reading. i am back on the horse with my sump build. i have a 15 gal sump 21x10x18 (space constraint) using a eshopps pf 300 over flow, 2 baffles, and a rio 2100 return with a 4ft head using 3/4'' return line. my question, my eshopps 300 has a 1 1/2" bulk head. do i need to...
  3. General Reef Discussion
    To ALL: I (a relative newbie) am wanting to expand to a 220 gal tank I would like the system to be as automated as possible and to leverage technology as much as possible to run the system. I am looking for any set-up diagrams and any advice that includes the following items: 1. Refugium 2...
  4. Water movement (pumps & wavemakers)
    I am plumbing a 215 gal Oceanic reef ready. I am using 3/4 inch PVC for sump input, and return. I have two ecosystem Pro Series 3012 sumps on either end of the tank that are connected at the outflow box end for equalibrium. I have two Danner Mag24 pumps in each sump for return. Though I haven't...
1-4 of 4 Results
Top