The Reef Tank banner
mp10
1-20 of 47 Results
  1. General Reef Discussion
    It's been a while since I've posted, but I am starting a new build. I am downgrading my 90 to a SCA 50G Starfire cube. Needed something that would be easier to maintain while I ride these waves of life. Ecotech states the mp10 will only work on glass that is up to 9.5mm thick. The Starfire...
  2. Water movement (pumps & wavemakers)
    I have an older MP40w that i am wanting to trade for a MP10. It is the older style with the white control. It works absolutely great. It hasn't been used in maybe 3 years, just sitting in storage. I would like to trade first and if no one wants to i will consider selling.
  3. General Reef Discussion
    Hi, Is anyone on here using a Vortec MP10 powerhead on their tank? I am really struggling to get the setup right. I have a 250litre Red Sea Reefer tank and I have 2 MP10's on either side. I cannot seem to get the right mix between either having dead spots were debris literally builds up on the...
  4. General Reef Discussion
    I was wondering if anyone has used mp10s on a 93 gallon cube, or in general with a tank whose glass thickness is 10mm. On vortechs website it says the max thickness for glass is 9.5 . I am just wondering if anyone has them on 10mm thickness and if they notice any types of issue.
  5. Water movement (pumps & wavemakers)
    Hello. Recently I purchased a mp10 for my reef tank with 1/4" glass, which it says in the instructions it is rated for that thickness. When I went to tinker with the pump today I realized that the magnet was very weak and when I tried to adjust it, it wouldn't stick. I read through all the...
  6. General classifieds
    I'm selling my mp10es in like new condition only ran for about 6 months. Asking 180obo. Also selling a biocube 29 with rapid led upgrade. Also everything else is upgraded. Any questions please ask. email me @ Viper693555800 at aol dot com
  7. General classifieds
    Selling my mp10wes. 210 shipped. Ready to go. I will provide a packet of magikleen with vortech for the buyer to clean it.
  8. Marine Depot
    "This is the best powerhead I have ever used. I don't see myself ever owning another tank without a VorTech pumping the water!" Read Matt's review of the EcoTech Marine VorTech MP10 - Product Review: EcoTech Marine VorTech MP10 Pump MORE MARINE DEPOT NEWS 5 Money-Saving Tips for...
  9. General Reef Discussion
    This will be my build thread for my Red Sea Max 130. I recently got an incredible deal on the tank from a friend and I decided to transfer the contents from my 29 gallon tank into the Red Sea Max. Since I was able to get the tank for cheap, I had some funds available for a lot of upgrades and...
  10. For Sale /Trade or Buy
    I am breaking down my 75 Gallon Set up and getting out of the hobby. The following items are for sale: Current 48" SunPod 2 x 250W HQI 18 LED fixture with ballast - $100
  11. La Crosse Area Reef Keepers (LARK)
    Want to make waves. Have two power heads hydor 750 and 1050 available to trade, or will negotiate cash...
  12. General Reef Discussion
    I finally got my mp10! Lovin it already. I know that most people usually mount theirs higher in the tank (just a few inches below surface). There are 2 versions of the manual online....I thought I had read the "full" version....but I hadn't. Then, after install, I was trying to fine tune and...
  13. General classifieds
    I am looking for a Vortech MP10W (wireless capable one) to pair with my other one! Let me know if anyone has one they want to sell!
  14. Water movement (pumps & wavemakers)
    OK so i got this new Vortech MP10! So excited. And when i want to install it i figure i have a dilema. Where to optimally place it. Here are 3 images that I took from the left, front and right of the tank. Please look at the aquascaping. The large rock is more or less in the middle so...
  15. For Sale /Trade or Buy
    40 Breeder tank (new in July2012) $60 5.5 Gallon Sump(with one baffel) $10 Eshopps PF-Nano Overflow $30 Tunze 9002 Skimmer(air liine mod) $75 Hydor Seltz l30 pump $20 Hydor ETH 200W in-line Heater $20 Vortec Mp10es $200obo Tek 6 Bulb T-5 with mounting leg kit $200obo (Bulbs: 2 ATI Coral + 2...
  16. General Reef Discussion
    I have been sporadically working on my tank and stand. I finally was able to finish the tank and move all my livestock, rock and equipment from my 20G to my new 40B this weekend. Let me know what y'all (I'm from Texas) think! 40B display tank 20L sump - no baffles Mag 3 return pump Mp10...
  17. General Reef Discussion
    Can someone help me here. Have an mp10, not the wireless one, is there a way to sync the non wireless vortechs
  18. General Reef Discussion
    Ok, I just purchased a mp10wes, soon to be followed by another. Right now they will benefit my 55g sps reef. However, i will be switching over to a 75g rimless tank soon and want to have a long pulse wave throughout it. Anybody have good/bad situations with their sand beds due to a wave in...
  19. General Reef Discussion
    Alright, so I've heard from some places that using the MPs whether it's the 10/40/60 that running them in the pulse/wave mode is very bad for them. Which I can kind of understand. So I have a question for all you guys who use the MPs, how do you get intermittent and varying flow throughout your...
  20. General classifieds
    For sale is Ecotech MP10wES, it is still under warranty the date on the controll box is Apr. 2012. I'm the original buyer. I went with mp40's. Has been running for only a month. will include original box and manual asking $260 shipped - OBO
1-20 of 47 Results
Top