The Reef Tank banner
head pressure
1-5 of 5 Results
  1. General Reef Discussion
    I'm looking for suggestions on the best pump for a basement sump. Want it to run a couple of reactors and around 800 gph return. Around 16' vertical head height. Please help.
  2. General Reef Discussion
    I have to decide by early tomorrow afternoon what plumbing to use on a pump under the house. 30" below deck. So what I have and want to do may contradict... Reeflo Snapper/Dart Hybrid in hand. 2" inlet and 1-1/2" outlet. #1 How will it change the pumps abilities if I adapt down a size 1-1/2...
  3. Water movement (pumps & wavemakers)
    I recently purchased a 72 gal bow front and drilled a 1 3/8" hole in the back and attached a bulk head which will accomendate a 1" pvc drain line. My sump is a 20 gal and I will have about 5ft return line (head pressure)... My question is what size return pump do I need to keep a constant even...
  4. Reefing Equipment
    I recently got an overflow unit (Eshops pf - 800)...I have it running to my sump...no matter what ive tried the unit still tends to make a fair amount of noise...If it makes a difference, I should mention that my sump is near to 6 foot below my tank (its right below it on a table in the...
  5. General Reef Discussion
    My Coworkers and I disagree on this topic. Will the same pump achieve the same head no matter the diameter of the tube or if it pumps through multiple tubes or pipes? See the picture and let me know in detail what you think and why! Feel free to even make your own diagram! I think I have...
1-5 of 5 Results
Top