I'm selling my buddies ASM G5 skimmer for him. It has two Sedra 9000 pumps, and is rated for tanks up to 700 gallons. It has had the gate valve mod done, and at one point was setup for running as a recirculating skimmer. However, we never felt that running it as a recirculating skimmer...
Custom Euroreef skimmer - 48" tall and 8" diameter, this thing is a beast. Have upgraded pumps to a Sicce PSK 1000 needlewheel and an Ocean Runner 3500 needle wheel both with venturis. This thing can make some serious skimmate. Equivalent to an ASM G-6. Has spiral crack on body that was...
So I am now about 1.5 weeks into a new from the ground up Salt tank.
55g 48" Glass
25G Glass sump
ASM Mini G Protein Skimmer
Jaebo WP-25 Wavemaker
Current USA 48-60" Reef LED
Koralia Nano powerhead (Left over from previous tank)
JBJ Arctica Chiller (Also left over...
Does anyone know if you can snap the regular impeller and needlewheel impellers off the magnet to swap out a swelled up magnet?
I have a chance to buy a new regular 3500 pump but I need to be able to put my needlewheel inside it for my ASM G2 skimmer and didn't want to wait a week for a new...
i got this skimmer with a setup i bought and still havent been able to Identify it positively. im 90% sure they skimmer is an ASM G2. but not sure about this pump. doesnt anyone recognize it? its a needle wheel.
and can you verify that the skimmer look slike a ASM to you?
I have an ASM skimmer, after looking around online, i cant quite figure out what exact model it is,
its 6.5 or 7" diameter chamber, which makes me think its a g2 or g3, but its only 20 inches tall? which all the ones they list are 24 or so. any ideas what model this may be?
Here is the specs of my wife and my first marine aquarium. Got most of the setup used, so I don't have all the exact specs, so if you recognize something let me know :)
Tank - 72 gallon All-Glass bow front
Sump - Not sure about the size, it came with the setup.
Return pump- Little Giant...
So i've had my asm skimmer going now for alittle over a month and it was doing great. A few days ago it just started to stop skimming. Its a fairly new tank couple months old. I decided to do the gate mod and just want to know if i did it right.
It just seems like it has way to much...
I am getting a ASM-G2 or G1X for my 20 gallon sump for my 55 gallon tank. And Im DIYing the sump, so Im trying to find out how much water should be in the section with the skimmer? And should my overflow and my return flow match the flow of the pump on the skimmer? Thanks
i hae over 200 lbs of fiji live rock for sale at $2/lb. also have an ASMg4+ skimmer. $175. i am getting out of reefs and moving over to dart frogs. also have a mag 18-$50 and a 75 gallon tank i was using as a sump. it has baffles that i made installed.$100.
front royal, va
hello all. well i decided to get out of reefs and i have broken down my 255 gallon system. sold all the corals , fish and salt. i have approx. 220 lbs of live rock. i am asking $2.00/lb. also have an ASMg4+ skimmer. asking $175 for it. i am in front royal, va. 60 miles west of washington DC. i...
Ok does anyone have any recomendations for a pump for an ASM G3 Protein Skimmer. I am having problems with the SEDRA 5000 pump and it is only 6 months old. Any recomendations as to a different pump that will work that is better and easy to install would be helpful. Thank Scott
so i finally made up my mind and decided to upgrade my skimmer, i decided on the ASM G1 and its going on my 55/10 fuge/30 sump(its only half water line though).... what does everyone think? its not recirculating but its needle wheel, ive read lots of stuff about them, only heard a few small...
Hello everyone. I'm currently cycling my new tank setup and I stumbled onto this great site trying to find information on refugiums. This is the first time I've ever dabbled in SW tanks, so I'm trying to find out as much as I can about the hobby. I'm planning on doing a reeftank with...
Here are my tank specs for future reference:
- 90g AGA with corner overflow
- (2) K3 powerheads for now
- DIY durso stand pipe to 1" bulkhead
- DIY 30g sump with skimmer section -> return section -> fuge
- ASM G2 skimmer with gate valve mod
- Eheim 1262 return pump with a bit of...
i use a ASM G-3 skimmer which came stock w a sedra 5000 pump. i went to plug it in and it wont power on. does anyone know of a trouble shooting guide? is it the impellor? how can you tel if its the impellor or is the pump just shot?
ASM G-2 Protein Skimmer w/ Sedra 3500 Pump
Used for about a year and a half. Will need a new Magnet/propeller for the Sedra 3500 pump. The pump stops and will not start by itself. $125.00 Shipped!
I will post pics soon.
I am thinking about upgrading my skimmer to a size that I can keep down the road for a while. Maybe an ASM G3 or Reef Octopus NWB-200. Total water volume now is around 40 gallons. Most of you know that both are rated for up to 250 gallons. Which is your favorite? Any input would be greatly...