kriesel - Page 2

Bubbashrimp · 08-16-2006, 04:14 PM

Who manufactures your acrylic, might it have different properties than acrylite Gp? Is the formula for hydrostatic pressure, found on the link, the same for all acrylic? Mainly the maximum allowable stress(the 750#)

http://cyro.custhelp.com/cgi-bin/cyr...i=&p_topview=1

hope this link works.

one more toward my goal
being able to have a poll.

Bubbashrimp · 08-16-2006, 04:23 PM

nevermind the title i was thinking of something else at the same time.

Acrylics · 08-16-2006, 05:48 PM

The formula on the Cyro website is fairly flawed but a good starting point. Most acrylics are similar in physical properties so the starting point would be good for most (domestic) cell cast acrylics.
FWIW, I only use Polycast for aquaria but Cyro GP and Plex G are both good materials.

James

Bubbashrimp · 08-16-2006, 08:36 PM

I have tried puting in 1000000 for length and the results very similar to 100000, is that whay you mean by flawed?

Geoff · 08-16-2006, 09:14 PM

Geoff ducking due to all of the numbers zipping over his head.

G~

Bubbashrimp · 08-16-2006, 09:21 PM

Really, numbers to me are like picasso is to his paintbush. I am a mathematician

Did i read this right?