|
No worries Tom, it was a complete kit. CO2 bottle, regulator, electric solenoid, the works.
However, after hooking it up to one of the coral displays in the lab's public aquarium and letting it run most of the day, I checked the pH of another tank very close to the tank running the reactor and the pH read 7.8. Very confused, I checked the pH of the tank running the reactor and it too was 7.8. So was another tank close by. I could see some investigation was necessary. after checking every seal on the regulator, reactor, solenoid, etc. I discovered that the check valve threads on the bubble counter had NOT been tefloned properly and had been unsealed during the move. So, I had been leaking C02 right over the sumps of three tanks most of the day. You can just imagine my colorful monologue. So a little aeration and some fresh teflon was all it took to set things right, but what an unnecessary surprise.
__________________
"The cultured might call him heathenish, This man of few words, because his one care is not to interfere but to let nature renew The sense of direction men undo." Lao Tzu
|
