Please help w/powerhead locations

[dobbs]

Hello,

I just got 2 more powerheads for my 75. Seio 620's. They also came with the Sure Grip 50 magnetic PH holders.


I also have a MaxiJet 1200 with a Hydor rotating head


Can someone help me with the location of these 3 PH's...along with the positioning of the outlet hose of my sump pump. As you can see in the pic below...I have it aimed at the glass in the rear. I guess at a 40 degree angle.

I know at least one of them should be somewhere??? slightly over the sandbed.

Here is a picture of my current rockscape. If that should be re-arranged - please offer suggestions.



Thanks again,
Dave

[tims]

is one alrqdy in the picture?
back right corner?
that is where the frist one we be for me, then the smaller unit about mid way down behind the LR

[dobbs]

Originally Posted by tims

is one alrqdy in the picture?
back right corner?
that is where the frist one we be for me, then the smaller unit about mid way down behind the LR

That's the 1200 w/ the rotating head in the pic. I moved it to the center of the tank, then put the 620's on the right side. Here is a pic. What do ya think? The water is a little cloudy,,,just got done siphoning the turbo poo.

[xaoss23]

I like that placement except that I would take the sieo on the sand and put it in the opposite corner (left side) and point the return locline thru back of rock

[dobbs]

Originally Posted by xaoss23

I like that placement except that I would take the sieo on the sand and put it in the opposite corner (left side) and point the return locline thru back of rock

Thanks. I have my sump return aimed throgh the back of the rock. Do I need more?