i have two basic questions

nobody · 05-21-2006, 04:59 PM

1) i do not have the top of my water moving for ariation as you can see by the pic but with my overflow box/ wet/dry filter the water is tumbling alot.............is that enough

2) my darn water is not crystal clear.........i do not know why............looks like tiny particals maybe bubbles............i just added carbon to my wet/dry anything else i can do

wharyat · 05-21-2006, 05:03 PM

1. I would probably throw a PH in just for the purpose of keeping the surface nice and agitated.

2. Could be many things, but most likely microbubbles since the tank is pretty new. It takes around a month for all the plumbing to get a slime coat on the inside; after that m'bubbles usually go away.

VWD · 05-21-2006, 05:08 PM

I agree on surface movement and you may want to place a foam filter block in the sump between the water coming from the bio wheel area to the pump, It will help remove some of the bubbles.

tims · 05-21-2006, 06:45 PM

1. can you take a picture of the top including the over flow..

2. can you take a picture of the filter unit.. there may be some things in ther you dont need. and if it is new , as the others said it will break in