this is where iam at. i have AGA 125g RR tank with rounded over flows in each corner with a drain and return in each. my sump is a 30g long that i was thinking of drillin so i could put a 10g next to it. i was thinking i would have my skimmer in my 30g on one side and a refugiem on the other and from there that would drain in to my 10g for my pump. the pump i picked up is a
IWAKI MD-100RLT i know its alittle big but i plain on putting a
ball valve on the return side. for my return and drain i planed on taking my 2 returns and 2 drains from my tank and making all of them drains. the bulk heads a 2 1" and 2 3/4". for the return part of it i was thinking of running it over the back and Teeing it off so i can run 4 eduter (sp). i know the eduters flow alot of water so that y iam putting the ball valve on my pump to control it better. so my question is how dose this sound. i was maybe thinking of running a closed loop but not sure. so ne help would be great.
thanx
jeremy