Stuff available from tank breakdown

[Jessezm]

I really want to sell it with the stand. $125 if you don't want the SCWD. You can do what you want with the stand from there... $40 for the lights. I believe it's made by CSL. Has a great reflector and new bulb.

[thekid55]

thats to high in price im on a budget still have to buy glass sections. and silicon. i know this is really low than what you wanted but i cant go any higher than you wanted but i can only go as high as $50.

[Jessezm]

How bout a 55g sump with glass baffles already in place (a few would need replacing as they are broken). Drilled for external pump. $25. Not the prettiest thing in the world, but functional nonetheless. I'll throw in the silicon as well, and some thin acrylic sheets to cut your new baffles. Comes with bulkheads, too. Just cap them off if using an internal pump.

[thekid55]

for $25 you said ill take it. where are you located? a pic would be nice.

[Jessezm]

There's a bad pic (the tank is upside down!) back in the first post of this thread. I live in Macon but could meet you at my office in Atlanta (I-85 and Druid Hills). Oh, just give me a call! 404-606-0181. Same goes for anyone else who needs to get in touch.
--Jesse

[Jessezm]

also comes with a kent float valve (for RO/DI top off)...

[thekid55]

not sure where that is but let me map quest it. i do want it.

[Jessezm]

Okay. I'll bring it tomorrow if you like.

[robsmith32]

yeah, it costed me $200 to put that 55g in place... and it was a used tank to begin with.
Like said, it ain't pretty, had to break top of baffles to lower water level so the ev would be fine under the stand in it.

stand for the 40brdr is a Oceanic item60290, 58/50ll/70ll black oak cabinet.
29.5" inside stand height, 32" tall overall. It's not the particel board veneer junk purchased from kappaknight for $75 or $80 used. Great condition.
The 40brdr i purchased around same time for $100, and I added the sqwd new. What jesse is asking for this is too low as it is.. If you can't afford that price, you sure as heck can't afford to care for the livestock! THis is been only in my possesion since March/April. Had the 150g for over a year.

[robsmith32]

sorry, if offended many with that, but to lower the price from where jesse has it? come on.
40g brdr in the store undrilled is 99, the stand is like 150 if recall.
to drill the tank, you're at 25 per hole... Bulkeads are about another 15-20 on top of that. then the sqwd new is 39.99, most go for 25-30 used.

[robsmith32]

the ca reactor as mentioned would easily handle a 90g and a LOT more.
Dunno how much the media would run to replace, i've had it for over a year and just put in a small amount that i got when i purchased the reactor. If you notice how small the ro/di unit looks next to it for instance.
co2 it was the 5lb tank, and i've had to have refill at each 6mo so far, but that was before cranked it up more in march to support the stony corals, i had gotten. When i priced a new tank from airgas they were 96 i believe for a 20lb tank. And if you're considering getting one do it, as in my opinion that ca reactor was probably the 2nd best purchase towards keeping tank, 1st being the tank itself.. Only time i had to dose buffer due to a ph drop, since adding the reactor was when the co2 ran out and was a week before i refilled it. It kept the ph allways up 8.1-8.3 with all the alkalinity it added, even at night.

[Jessezm]

Hah, thanks Rob, for backing me up on the prices--I hope I'm not insulting you! I told you all I am not trying to make a profit here, just trying to disperse fairly and make up some of the $1800 I shelled out to get some things I needed. I've got a trunk load of lights, pumps, tanks, monitors, and other odds and ends coming up to Atlanta with me tomorrow. Hopefully I'll leave town with a lot of room in my car!

[is_that_a_fish]

Jessezm so if all goes to plan i guess ill see you thursday to pickup my light.

[Jessezm]

Sounds good, then. I've got it with me today if you're around, but I'll bring it Thursday as well.

[Jessezm]

UPDATED AGAIN!

Tanks:

6ft. 150 Oceanic with stand and glass tops (glass centerbrace and two corner overflows, black tinted back panel). Comes with 2 durso drains and 2 loc-line returns with all bulkheads.$300 Tank pending to Justin



40 gallon breeder with stand, drilled in the back panel for 1 overflow and 2 returns, plumbed through a SCWD. With all plumbing: $150
Bare: $125 OBO. Great frag/grow out tank!

29G tank W/ stand: $40 OBO

Lighting:

(X1) 30" NO T5 Aqualight: $20
Link: http://www.hellolights.com/30aqt5dolist.html pending to is_that_a_fish

(X1) 24" NO t5 freshwater aqualite $15

1X65W Coralife PC hood w/ new bulb (I think it's a 50/50, but I'll double check: $40 (nice black powdercoated hood, comes with box)

30" Current Sunpod Metal Halide/lunar light combo--150W hqi with 12 lunar lights. Newish iwasaki 20k bulb. $200. Link: http://www.marinedepot.com/md_viewIt...roduct=CU01062
With additional new Current-supplied 14K bulb, $220

3 weeks used Current USA supplied (not sure of the make) 150 watt 14k DE Bulb by itself: $40

OTHER:

Reef Fanatic pH and temp Monitor with probes (not controller): $65

Calcium reactor: 4ft DIY, dual chamber (not pretty, but will handle very large tank!):
$50 Pending to bluegrassweety

Pumps/Powerheads/filters:


Seio m620 $20 PENDING to Pillz, then GerogeW

(x4) MJ900's: $10 each 2 pending to Justin

Mag 3 $20

Little Giant 3mdqx-sc: 1100gph pressure rated pump $70 OBO

Ehiem (1262), pending to Mufret

Fluval 202 canister filter: $35

If there is anything else you are looking for, let me know--there are some things like air pumps and heaters that I haven't listed yet.