I'm in the process of adding an auto top-off system to my tank right now. I would also like to add a
kalk reactor after I have the auto top-off set up. I've read that you can feed the kalk reactor using your top-off water, but I’m not sure how this works. I'm going to explain what I’m confused about and hopefully someone can shed light on my problem.
I know the kalk reactor can be set to mix at certain time(s) of the day and it's best to dose kalk at night to help balance the pH. To only dose at night I guess I would need to put the water pump for the top-off system on a timer. The problem I see is that most of the evaporation occurs during the day while the lights are on right? This means that the first time the top-off system runs at night, it will refill the sump with all of the water lost during the day. This also means it will dose an extremely large amount of
kalk water at one time. I'm sure this could be a huge problem, so I’m trying to figure out if there is a way around this.
Do I forgo only dosing at night?
It seems as if my tank evaporates around 2 gallons a day. Can I over dose my tank with Kalk by adding this much in one day?
Tell me how some of your systems are set up.
Thanks in advance.