6' mh hood

[robsmith32]

This is the typical black powdercoated metal halide hood with 6' vho.
3 x mogul
2 pair of t12 waterproof endcap

currently i moved the endcaps in so they fit 2 4ft normal bulbs,
I'll include both bulbs, the 4ft and the 6ft, the 6ft are the uri actinic vho.
The tar ballast included is for the normal output 40W, also included is the icecap 430 vho ballast.
2 of the MH are 175w hamilton 14k on csl dual ballast. I believe is magnetic.
1 center mh is an 250W xm 10k on a blueline eballast.
I'll include 3 ge power strip mechanical timers. Can set on/off as often as 15 minute intervalls.

Each mogul has its own power cord, out, and all ballast are remote.
Hood has 4" fan on 1 end.

1 hamilton 14k i'd say has a bit of life left, the 1 prob should be replaced, the xm i've had since sep? ran 2 hours a day. and one of the 175 was ran for an hour or 2 a day. the one needing replacing.
I no longer use this hood, as i moved my light demanding sps/lps to 40 brdr.
as pictured has the 4' normal' s installed in it, it's about 20-25 minutes to move endcaps to install with the vho's.
Price make a fair offer. feel free to pm. fwiw, new they are around $800 and up.

[bcromwell]

Originally Posted by robsmith32

This is the typical black powdercoated metal halide hood with 6' vho.
3 x mogul
2 pair of t12 waterproof endcap

currently i moved the endcaps in so they fit 2 4ft normal bulbs,
I'll include both bulbs, the 4ft and the 6ft, the 6ft are the uri actinic vho.
The tar ballast included is for the normal output 40W, also included is the icecap 430 vho ballast.
2 of the MH are 175w hamilton 14k on csl dual ballast. I believe is magnetic.
1 center mh is an 250W xm 10k on a blueline eballast.
I'll include 3 ge power strip mechanical timers. Can set on/off as often as 15 minute intervalls.

Each mogul has its own power cord, out, and all ballast are remote.
Hood has 4" fan as well. Either 1 or 2, i don't recall at the moment.
I'll recheck and post pics asap.
1 hamilton 14k i'd say has a bit of life left, the 1 prob should be replaced, the xm i've had since sep? ran 2 hours a day. and one of the 175 was ran for an hour or 2 a day. the one needing replacing.
I no longer use this hood, as i moved my light demanding sps/lps to 40 brdr.

How much?

[robsmith32]

make a what you feel is a fair offer. I have the 6' ft uri actinic vho in garage, if the fact the normals in there holding anyone back, i can swap them back. Totally optional.
In either even the vho's are included.

[robsmith32]

The smears are just where whiped dust.
the wires from the flourescent ballast would look much better if picked up heatshrink tubing from home depot or radio shack.

[robsmith32]

I mentioned new they go for 800, i'm not expecting anywhere near that much. As a bulb would be needing replacement, and prob would opt to replace both hamiltons.
I'm really wanting an ac jr setup.