need a little help setting up the reactor

[sanblas]

Ok, I know Ive been very needy about my new calcium reactor lately...but these things are 'hard'(spoken in W voice)

I could use a little help

Ive attached a picture with numbers on the intakes/outakes...I have all the parts now, but am very confused as to what connects where

so I have labeled
1-output back to tank
2-dont know
3-intake into 2nd tube from first tube
4-dont know
5-co2 line?
6-intake from tank from maxijet 1200?

not the mad 3 pump attaches to the first chamber via the union and pvc fitting

I can post better pics if that would help

basically Im confused where the intake from the tank is, and what the two outputs and the T on top of the first chamber is

sorry Im being so clueless about this, but done want to make a mistake with compressed gas

[wanareef]

Originally Posted by sanblas

Ok, I know Ive been very needy about my new calcium reactor lately...but these things are 'hard'(spoken in W voice)

I could use a little help

Ive attached a picture with numbers on the intakes/outakes...I have all the parts now, but am very confused as to what connects where

so I have labeled
1-output back to tank yes
2-dont know Sean take off the "T" and that short piece of hose, and attach it to the other "T" one will be the supply and the other will be for the CO2. This will be the out from main to the second chamber
3-intake into 2nd tube from first tube yes
4-dont know attach 6 to 4 this is for recirculating the co2 that gets trapped under the lid
5-co2 line? see 2
6-intake from tank from maxijet 1200? see 2

not the mad 3 pump attaches to the first chamber via the union and pvc fitting

I can post better pics if that would help

basically Im confused where the intake from the tank is, and what the two outputs and the T on top of the first chamber is

sorry Im being so clueless about this, but done want to make a mistake with compressed gas

Sean I guess I should have labeled everything for ya

[sanblas]

ahh, thanks charles, I was looking at all the tubing yesterday and was completely lost, I'll try hooking everything up today...
thanks!